Crafty Fun

 Hello!  Well, I am slowly, but surely, getting out of my funk.  I'm still sick, but a lot better.  I lost some time with this illness!  I have things to do! 

Remember this Sweet Brown meme from 2012?

I did make time to make this canvas for our daughter's birthday next week.  She and I have loved Harry Potter since she was a little girl (she's almost 30 now).  The midnight premiers were "our thing."  And we both still love HP and everything related.  I think she is going to like this.

This is the first time I have used heat transfer vinyl on a painted canvas, and I'm really proud of how it turned out.  I took three designs from Cricut Design Space and incorporated elements from both and used Hufflepuff colors.  I ordered a wooden easel to set it on.  I can't wait to give it to her!

Materials Used:

6 inch square canvas

Apple Barrell acrylic paint, Territorial Beige

Foam paint brush

Siser heat transfer vinyl (various colors)

Heat press

Heat press mat

(Some affiliatelinks-If you make a purchase, I may receive a small commission at no cost to you. This is not a sponsored post.)

I'm linking up with Friendship Friday, Christmas Crafts and Decor, and Crafty Creators.  Visit them for more crafty fun!

Sewing boxed corners

 

There is more than one way to "box" the corners of a homemade tote bag, but only one of them would work for the  way I wanted to make reusable grocery bags for my daughter.  The reason is that I wanted to start with one long piece of fabric instead of two separate pieces, so I would not have a bottom seam to work with.

After sewing the main piece of the bag, line up your seams until your bag comes to a point at the bottom kind of like the opposite of the way your would actually carry it.. The trick to making sure your corners are even is to make sure the side seams are exactly even.  You can also measure the marks you make on each side to double check that they are even.

Measure half of what you want your box to be.  For example, I wanted my box to be 5 inches across the bottom, so I measured up 2.5 inches from the corner tip, and marked it.  Using a ruler, I made a straight line.  (Same thing on the other side.)  Sew across the line, trim the excess, and check out your handiwork.

I'm pretty happy with the way it turned out.

I am going to iron on a design on the front and back of each bag, so I will show it again when it is completely finished.

For more crafty goodness, visit Crafty Creators, Friendship Friday, and Happiness is Homemade.
 

Crafty Friday

 

Hello!  I finally created a craft blog and named it Crafteverly!

If you know me , you know I love to craft!  I enjoy sewing, Cricut , wood, vinyl, paper, and so many other types of crafts, and I love creating  digital items as well.

I've finally opened an Etsy shop, but I only have two digital products uploaded so far, but I'm working on it!  Right now, I want to show you a key fob I made to support my hometown team the Astros.  You can make it using any fabric.  I just happened to have this fabric from when I worked part time at Jo Ann.

I also have to take better pictures before putting them in my shop!

This is super easy to make.  You need the following:

12x4 piece of fabric

12x4 piece of lightweight, fusible interfacing

iron and ironing board or ironing mat

any sewing machine

thread

key fob hardware

pliers

First, you iron the interfacing onto the wrong side of the fabric.  Next fold the fabric in half longways and press.  Open it back up.  Fold one side of the fabric in toward the middle and press.  Repeat on the other side.  Now fold in half again and you should have fabric that is 12x1 with all the raw edges on the inside.

Now take it to the sewing machine and sew a 1/8" straight stitch all the down the open side to close it up.  Then sew a 1/8" straight stitch down the other side so they match.  Now fold in half bringing the two ends with raw edges together.  Baste the key fob in place where the two ends meet.

The last thing to do is to use your pliers to attach the hardware to the fabric making sure not to scratch the hardware.  I used pliers that were made for this purpose as they have a rubber tip on them.  Add keys, and you're good to go!

Here are some others I made:

Thank you for visiting, and visit Crafty Creators and Friendship Friday for more crafting fun.

Links for materials are affiliate links to the exact products I used.  If you choose to purchase from one of my links, I may receive a small commission at no cost to you.  This is not a sponsored post.

Crafty Scrapbooking

 

Here are some scrapbook pages I made when my sister and I went on our retreat.

The first one is from when our first granddaugter was born.

Materials

Cricut Maker

Cricut Mat

Cricut Pen

Echo Park It's a Girl Kit

Tiny white brads

Glitter Copper Pops of Color

Tiny white bow

Adhesive dots

Adhesive tape runner

Pokey tool

The second one was from our youngest daughter's wedding, and it's a double page layout.

Materials Used

Cricut Maker

Reallike Light Grip Cutting Mat

Cricut Pen

P13 Truly Yours cardstock (discontinued at Scrapbook.com)

Matting Paper from my stash

Echo Park Our WeddingEphemera

Silver brads

Metal Cross brad from my stash

Ribbon

Bling shape from my stash

Adhesive dots

Adhesive tape runner

Pokey tool

I hope you liked my pages!

Some of these links are affiliate links.  If you click and make a purchase, I may receive a small commission at no cost to you.  This is not a sponsored post.

I'm linking up with Inspire Me Monday, Happiness is Homemade, and Crafty Creators,  I will link up with Friendship Friday when it is up and runnin regularly again.

Crafty Friday-An Update and Handmade Key Fobs

 

Whew!  My first post this week!  It's been a little crazy around here.  My sister and I were on our girls' trip.  We have done at least once a year since my dad passed, sometimes more than one.

On the last day of our trip, our mom took a fall.  We were able to see what happened on the camera we installed in her "apartment." When we got back from our trip, I went straight to the hospital.  She ended up only having to stay one night, but we have been visiting her more often since then.   She had multiple tests and blood work, but nothing is broken, and they aren't concerned it caused any damage. Thank goodness!  My father-in-law (age 93) has had a few scares recently, too.

My sister had her six-weeks-after-chemo and radiation CAT scan.  All clear for now!  Repeat in six months.  I pray it stays that way.

My blood pressure has gotten out of control.  I'm starting a new medication and I have an echo-cardiogram (not the same as an EKG) on Saturday.  Yes, Saturday.  Weird, right?  I was born with a bicuspid aortic valve, so I have to get checked every so often.

Now the fun part:

I made these key fobs!  It was super easy!

 

Actual materials used:

• Cotton fabric from JoAnn.
• Lightweight fusible interfacing
• Key fob hardware
• Key fob pliers
• Fabric Scissors
• Iron or heat press
• Sewing machine (I purchased mine at JoAnn)
• Universal needle
• Bobbin for Brother sewing machine
• Thread

To make it, cut a 12x4 piece of fabric and 12x4 piece of interfacing. Fuse the interfacing to the back of the fabric.  With right side down, fold fabric in half longways and press.  Open up the fabric and turn each side to the middle and press.  Fold over once more and press.  Sew a straight stitch along both sides of the fabric. Fold so that you bring the two raw edges together and press.  Sew the short raw edges together to make a loop.  Give it one final press.  Attach the hardware, and that's it!

For more crafty fun, visit Friendship Friday, Happiness is Homemade, and Crafty Creators.

Have a great weekend!

Some of the links in this post are affiliate links.  If you decide to purchase something through those links (from Amazon), I may receive a small commission at no extra cost to you.  This is NOT a sponsored post.

My Favorite Scrapbook Page (this week)

 I am at a crafting weekend right now, and my sister and I have been scrapping weddings (my daughter's, her son's).  Here is my favorite page so far.

Click to see larger

The materials I used:

Stamperia cardstock paper from the New England pack (pictured above my page)

Design Cut with a View solid shimmer pager

1 small lace doily

Doodlebug Design Fancy Frills cardstock stickers (white) 

Ribbon from my stash

Flower from 49 and Market Flower Mini Series 1-Cobalt (also from my stash)

Plain white cardstock from my stash

Adhesive glue tape runner

Aleen's clear gel tacky glue

Pearlized blue gems

Ruler

Cricut Metallic Blue 1.0 gel pen

Cricut Maker (any cutting machine will do)

I hope you like my page.  It was so much fun creating it!  I'll be sharing with Friendship Friday at Create with Joy and Crafty Creators at Life as a Leo Wife.

Some of the links in this post are affiliate links.  If you choose to make a purchase, I may receive a small commission at no cost to you.  This is NOT a sponsored post.

Fleece Baby Blanket

 Hi friends.  As you may know, I have another granddaughter, so I just had to make her a blanket!

I used a remnant I got at JoAnn a while back.  It was an unusual rectangular remnant which would have looked funny, so I ended up cutting it in half meaning it has a seam in the middle and the elephants don't match up there. It's still a rectangle, but the dimesions are more suitable now. For the back, I used some soft gray fleece.

I usually sew on flannel rather than fleece, and fleece is so much thicker that I had to use my Walking Foot (the same type you would use for a multi-layered quilt).  Otherwise, it was too difficult to get all of the fabric to feed under the regular foot.  I tried it.  The walking foot worked much better!

I want to make myself a shirt with this adorable  design from Creative Fabrica.

If you're a crafter, you really should check out Creative Fabrica for affordable designs!

Visit some more creative friends at Friendship Friday and Crafty Creators.

Have a great weekend!

Some links within this post are affiliate links meaning if you make a purchase, I may receive a small commission at no extra cost to you.  This is NOT a sponsored post.

Crafty Storage Solutions

 

Hi friends.  I have been very busy restructuring my craft room to make it easily accessible for all of the different crafts I like to do.  I would say that my top three crafts are scrapbooking, card-making, and sewing.  (I also love to make things with wood and canvas.)  My storage of certain items just wasn't working for me.  I had to find some solutions so this doesn't happen:

  First,  brads.  I have different types and colors, and they are small and easy to lose, so I have to have a failproof way to store them.

  I used to keep them in a sort of tackle box type container, and I thought about going back to that, but the box was actually too big. Brads are small.  I've been keeping them in tiny zip bags in some clear jewelry-type boxes on my table. 

My solution is going to be to store them in these clear Fab Lab Containers and store the containers in a clear plastic bin  like these so I can see at a glance what I have and grab what I need.

(I already have them, so I didn't purchase anything new.)  I'm also going to store my stamp pads in one of these because they have outgrown the bin they are in now.

Next on my list is card-making supplies such as card fronts, folded cards, and envelopes, all in different sizes.  I decided to purchase a bin that has 6 tabs built in tabs. 

I can put them in the box and have them right at my fingertips (with labeled tabs) instead of having to dig through the photobox where they are now.  

 I am also using one of these square boxes for my patterns.  My patterns fit nicely into the medium sized plastic envelopes sold by scrapbook.com.  The medium envelopes fit nicely in the box above since the box also came from Scrapbook.com.

I have already organized my fabric into two large totes.  I folded the fabric around cardboard pieces so that I can see everything that I have at a glance and in color order.

Next, my thread and sewing notions.  Instead of this...

I've purchase an actual storage bin that is made to hold thread.   I purchased this at JoAnn.

Last, I need a solution for my embellishment flowers like these.

 I've been storing them in little buckets hooked to the bottom of my pegboard.

The buckets are cute, and I have easy access to them, but I don't like not being able to see what I have.  They are divided by color, which I like, but they could also be gathering dust.  I  watched a video today of a scrapbooker who keeps hers in plastic zip bags, but she never said where she kept the bags, so I'm open to all ideas!

My goal is to have my craft room organized so that I can easily find everything I need, and these were problem areas. I've already tamed the paper, punches, adhesives, stencils, pens, kits, and photos.  When I finish this round of organizing, all I will have left to organize are the flowers.  Any suggetions?

I'm linking up with Crafty Creators and Friendship Friday.  Come find me there!  Have a great weekend!

Some links are affiliate links, and others are not.  If you click through to purchase a product from an affiliate link, I may receive a small commission at no extra charge to you.  This is NOT a sponsored post.

Crafty Friday

 Hi friends! Recently, I made a crossbody purse to use on our 2nd annual Great Texas Road Trip.

 It was 9x9 prior to sewing so ended up about 8x8 after seam allowances with one slip pocket on the inside made with the lining fabric and bias tape. 

This shows how long the strap is.

I learned how to make the slip pocket from YouTuber Anne Bonney Bags. I learned how to create the adjustable strap for my bag from YouTuber Le Janaro. 

Here is the hardware  I used, and here is the zipper.  It worked perfectly for our trip!  I needed to be able to walk hands-free in order to use my camera, but there are always certain things you want to have with you at all times.

I also made my own reversible bucket hat.  I got the free pattern from Hello Sewing which I was able to tweak to fit my smallish head, and I followed her video tutorial on YouTube. 

This hat was very useful when we visited Big Bend National Park.

Visit more crafty friends at Crafty Creators and Friendship Friday.

Some links in this post are affiliate links (not all of them) which means if you purchase an item from one of my links, I may receive a small commission at no extra cost to you.  This is NOT a sponsored post!

Card-making Fun!

 

Hello, friends!  Today I want to share with you 3 cards I made recently.  Two were for new babies, and one was for birthday.

For this one, I used some scrap paper and my Cricut Maker.  I cut the design out of the green and had the Cricut marker add the words.  I added some adhesive lace from Hobby Lobby on the left side of the card (they don't seem to carry it anymore) and a simple bow between the onesie and the words.  This one was pretty easy, and I think it looks "just okay."

For this one, I did some ink blending first using yellow, green, and aqua from my Color Petal inkpad.  I like the way the inking turned out. I used Scrapbook.com ink blending tools with the dome shaped foam.  I layered the message Special Delivery and layered the clouds.  I used scrap paper for all of the cut images.  I had the last name on the tag in the stork's mouth, but I colored it out to protect their privacy.  The stork had 5 layers and was very tedious to put together.

I just noticed a balloon without a string!  Oops!  I used stamps from Scrapbook.com for this card.  I used the Cards for Kindness stamp set to do the "Happy Birthday" part and the Sunny Studio Birthday Balloon set.  I drew the strings with a Flair pen. I then sprayed with Tonic Studios Nuvo Mica Mist in Nebula Blue.  It tends to curl the paper, so I had to leave it under a heavy book for a while and iron it on low to get the curl out of it.

I am still learning.  If you have any tips and tricks for me, I'm open!  In the meantime, for more crafty goodness, visit Crafty Creators and Friendship Friday.  Have a great weekend!

Note:  Some of these are affiliate links.  If you choose to make a purchase, I MAY receive a small commission at no extra cost to you.  Not all links are affiliate links, and this is not a sponsored post.

More Sew Fun!

 Hello, friends!  I've been sewing again. This time I used the same pattern but made a different view of the dress.  Here is the pattern:

This time I used view F with the ties and the flounce in a contrasting color.  I only had one yard of this adorable Watercolor Butterflies fabric from Hobby Lobby, so that worked out. This is the dress:

I think the other one turned out better, but maybe it just needs a good press.  I also made her a matching bow and wristlet.

The bow is attached to an alligator clip.

Thanks to Youtuber, The Crafty Gemini, I was able to make this easy wristlet.

I used my Babyville Boutique Snaps and Snap Pliers.  I love how easy it is to add snaps and decided to make one for myself.  Mine is more of a card wallet so I don't have to take my entire wallet on vacation with us and it has no wrist strap.  These Babyvilled Boutique snaps are very strong and give me tons of ideas!  Here's mine.

I used this canvas home decor fabric from JoAnn for the card wallet.  I need to practice sewing around curves (and just to mention it also, I need to practice working with zippers.)  I attempted to make a small zippered purse (not the large one I made a few weeks ago), but it doesn't look as nice as I'd like it to, so I'm going to need practice.

I hope you'll visit Crafty Creators (Where I was featured a couple of months ago) and Friendship Friday to check out what other people are making or learning.  Have a great weekend!

Note:  Some of these links (not all of them) are affiliate links, and I MAY receive a small commission if you choose to make a purchase at no extra cost to you; however, some are not affiliate links.   I have only linked supplies I actually used to create these items. This is NOT a sponsored post.  Thank you.